opening hours:
mon-thu 9:00am - 5:00pm
fri
 9:00am - 3:00pm

17.-18.05.2012 closed.

contact

fon front desk:
+49 (0) 25 53 - 93 58 -0
fon sales department:
+49 (0) 25 53 - 93 58 -40
fax:
+49 (0) 25 53 - 93 58 -29

75 Jahre ERO

LED profile Z-standard | Print |

LED profile Z-standard

  • mounting profile for LED stripes with adhesive tape with a maximum width of 12mm
  • compact profile 8,96x17,9mm
  • mounting with mountingclip
  • cooling properties: 1cm = 3qcm surface
  • material: aluminium anodised nature
  • dimensions: 8,96x17,9x2.000mm, tolerance +/-2,2mm
  • weight: 0,17kg/m
art.no. 305 310 41


mountingclip

mountingclip mountingclip dimensions
  • mountingclip with stud to prevent LED profile sliding if mounted vertically
  • metric M 2,5 screw or self-tapping screws with a diameter of 2,2 to 2,9mm and a screw head height of no more than 2,2mm are recommended for fixing the mountingclip
  • The profile may not be exposed to any mechanical stresses. If it is exposed to vibrations or wind the mountingclip can detach from the fixture. It must therefore be additionally secured.
  • material: PBT white
  • dimensions: 6,5x18,7x33,5mm

number of mountingclips required:
One mounting plate is needed per 0,5m profile, and at least two are needed. The mounting plate must not be subjected to any further mechanical stresses. If this cannot be guaranteed (because of vibrations for example) it may become detached and must therefore be secured with additional fastenings.

vertically mounting:vertically mounting
Mountingclip at the top of LED profile: the stud on the end cap prevents the unit sliding down.

art.no. 305 351 02


end cap

LED Profil Z-Standard Endkappe
  • end cap for LED profile Z
  • material: PMMA metallic-grey
  • dimensions: 19x23x6mm
  • not suitable in combination with linear lens
art.no. 305 325 97


standard cover

standard cover standard cover dimensions
  • cover for LED profile Z, LED profile Z-45, LED profile Z-Slim, LED profile Z-B
  • snap-in mechanism; no tools required
  • material: PMMA
  • dimensions: 10x20x2.000mm
covers:
The cover may not be exposed to any mechanical stresses. If it is exposed to vibrations or wind the mountingclip can detach from the fixture. It must therefore be additionally secured.

art.no. 305 315 30 cover transparent, transmission 92%
art.no. 305 315 33 cover frosted, transmission 82%
art.no. 305 315 34 cover white, transmission 62%

 

cover with linear lens

cover with linear lens
  • linear lens for LED profile Z, LED profile Z-45, LED profile Z-Slim, LED profile Z-B
  • no tools required for installing
  • homogeneous light distribution
  • light reflection angle along length axis 30°, 60°, 90°
  • material: PMMA transparent or frosted
  • weight: 0,17-0,2kg

Mounting notes:

The lens has to be slided on the profile. It is not allowed for snapping on the profile. This will cause damage. To avoid sliding off the profile, the lens has to be fixed by end caps.

The cover may not be exposed to any mechanical stresses. If it is exposed to vibrations or wind the mountingclip can detach from the fixture. It must therefore be additionally secured.

linear lens 30°

linear lens 30°

art.no. 305 354 30 linear lens 30°, transparent, 9,7x20,1x2.000mm
art.no. 305 354 33 linear lens 30°, frosted, 9,7x20,1x2.000mm

linear lens 60°

linear lens 60°

art.no. 305 355 30 linear lens 60°, transparent, 9,5x20,1x2.000mm
art.no. 305 355 33 linear lens 60°, frosted, 9,5x20,1x2.000mm

linear lens 90°

linear lens 90°

art.no. 305 356 30 linear lens 90°, transparent, 8x20,1x2.000mm
art.no. 305 356 33 linear lens 90°, frosted, 8x20,1x2.000mm
 

Zurück